Stack Questions

Adding & Transferring/Removing Bulbs

Adding Bulbs

Within a room's settings, select Bulbs.

Tap the + icon to begin the bulb assignment procedure. When assigning a bulb it’s important to follow this 3-step sequence:

  1. Screw in the bulb/s with the light switch in the OFF position
  2. Press Start to initiate the timer
  3. Flip the switch to prompt bulb to hub communication

During the timer, lights that are turned ON will be assigned to this room. The counter will rotate counter-clockwise as it adds the bulb profile. Once all lights have joined, tap Done.


Transferring/Removing Bulbs

Within a room's settings, select Bulbs.

Tap any of the available light bulb icons associated with the room --- this action causes selected lights to strobe. Once you have found and selected the light/lights in question, tap the house icon and select to remove or transfer them to a different room. 


Was this article helpful?
0 out of 0 found this helpful